Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to draw coner surface nx4 1

Status
Not open for further replies.
Replies continue below

Recommended for you

The above link is for the igs format file. I do not know how to post the file on internet.
 
If you have a webkey account at UGS's GTAC site, download the file to the 'scratch' are and let me know, or if look at my name, as in 'john.r.baker(at)ugs.com', you can probably figure out how to e-mail the file directly to me.


John R. Baker, P.E.
Product 'Evangelist'
NX Product Line
UGS Corp
Cypress, CA
 
It appears as if the end cap surface (where all the blends run together) is a Freeform surface and not a true Blend surface. You'll probably have to use a Through Curve Mesh or N-sided Surface to get similar results.

Tim Flater
Senior Designer
Enkei America, Inc.

Some people are like slinkies....they don't really have a purpose, but they still bring a smile to your face when you push them down the stairs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor