Luke18
Mechanical
- May 28, 2007
- 2
- 0
- 0
A big assembly file contains a lot of parts and subassembly that are named by a number. Could somebody tell me how find a part in Model tree? like search or find command...Thank you.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to find a part in a big assembly file?
- Thread starter Luke18
- Start date
- Status
Are you using Wildfire 2?
If so you can search for components using the 'Find' command. The icon is a set of binoculars at the top of the screen, or you can find it at the bottom of the 'EDIT' dropdown menu.
If its an earlier version of pro/e, Im afraid I cant remember that far back
If so you can search for components using the 'Find' command. The icon is a set of binoculars at the top of the screen, or you can find it at the bottom of the 'EDIT' dropdown menu.
If its an earlier version of pro/e, Im afraid I cant remember that far back
- Status
Similar threads
- Locked
- Question
- Locked
- Question