May 3, 2009 #1 Bailar Computer Jan 13, 2009 30 I want to use only linear interpolation in my post(not circular or helical). What should I do in post builder to represent my curve as segments?
I want to use only linear interpolation in my post(not circular or helical). What should I do in post builder to represent my curve as segments?
May 3, 2009 1 #2 bcl001 Industrial Sep 15, 2004 69 Hi Bailar, at Machine-tool within General Parameters please check: Output Circular Record : No Greetings, Bert http://files.engineering.com/getfile.aspx?folder=83b7b3b8-f703-49ae-8289-24d3ec78a835&file=[CircRec.jpg Upvote 0 Downvote
Hi Bailar, at Machine-tool within General Parameters please check: Output Circular Record : No Greetings, Bert
May 5, 2009 1 #3 Jaydenn Mechanical Jan 13, 2005 281 Another way to do it from within NX is to edit the "motion output" from the machine control dialog. No need to edit post and this way your post will still work with both options, linear and circular. You choose from within NX. See attached picture. I'm using NX5. J http://files.engineering.com/getfile.aspx?folder=4d614795-47cd-4d72-9a8f-89e4feb681cf&file=linear_only.JPG Upvote 0 Downvote
Another way to do it from within NX is to edit the "motion output" from the machine control dialog. No need to edit post and this way your post will still work with both options, linear and circular. You choose from within NX. See attached picture. I'm using NX5. J
