Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to get spot welds on drawings

Status
Not open for further replies.

bonenose

Automotive
Apr 24, 2009
1
I have an assmebly from and OEM that has three part files in the assembly. 2 parts are stampings and one is a spot weld file. When I create a drawing the spot welds do not show up. I have played with all the visibility and view properties slections with out any success.

The only way I have been able to bring the spot welds over to drafting is to create an assembly of the OEM assembly and create a model view then create a view in drafting of the created model view. I really do not want to do it this way.

Does anyone out there have any ideas on how to bring the spot welds over?

Thanks
Jeff Long (bonenose)
 
Replies continue below

Recommended for you

I usually just use text and put an asterisk where I want welds.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor