Aug 27, 2013 #1 Sarry156 Aerospace Aug 17, 2013 2 IN Hai, Does any one know how to identify 2 or more points existing at the same location in catia v5 using macro.
Hai, Does any one know how to identify 2 or more points existing at the same location in catia v5 using macro.
Aug 27, 2013 #2 loki3000 Mechanical Sep 29, 2009 652 SI cycle all the points, save the coords in an array and check for each point if the coords are already in array. if not, append them to array. Upvote 0 Downvote
cycle all the points, save the coords in an array and check for each point if the coords are already in array. if not, append them to array.
Aug 27, 2013 #3 Gilgamesh99 Automotive Jun 11, 2013 45 MX That's a very interesting method. Can you provide some piece of code? Thanks in advance! Upvote 0 Downvote
Aug 27, 2013 #4 itsmyjob Mechanical Apr 11, 2002 2,375 CA check this FAQ update faq560-1377 Eric N. indocti discant et ament meminisse periti Upvote 0 Downvote
Aug 28, 2013 #5 loki3000 Mechanical Sep 29, 2009 652 SI sadly not. i've been doing similar stuff in abaqus only, not catia. that was the way to go though. you can also do that from the above post and try to filter out duplicates. excel might have a feature for that. Upvote 0 Downvote
sadly not. i've been doing similar stuff in abaqus only, not catia. that was the way to go though. you can also do that from the above post and try to filter out duplicates. excel might have a feature for that.
Aug 28, 2013 #6 loki3000 Mechanical Sep 29, 2009 652 SI http://www.eng-tips.com/viewthread.cfm?qid=350597 Upvote 0 Downvote
