How to measure noise for an offshore equipment in North Sea

[udk]

Hi,

Can anybody help me how to measure the noise used for an offshore equipment.

Equipment : Grease Injection Skid
Application : Offshore use
Standard : Norsok / ISO

Please explain what should be the distance for the measuring point from test equipment.Whether the pump shoulb be run with max pressure / oper.Press.

 

[Rob45]

What does the test standard say?

 

[udk]

It should comply as per NORSOK Standard Z-015.But the standard doesn't say about anything how to take the noise level measurement (How much distance away from the equipment/Whether pump should run @ operating /max speed).

 

[GregLocock]

Hmm, either the standard is incompetent or you don't understand it.

or both.

Which paragraph of that 54 page document are you referring to?



Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.

 

[GregLocock]

OK, pay someone else, you are too stupid. The relevant document is S-002. That's $500 so far.



Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.

 

[GregLocock]

Sorry that may be a little harsh but why couldn't you even find the perfectly understandable definition in 002? Is our time somehow less important than yours?



Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.