Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to mesh a pie-shape surface using structured mesh in DesignModeler?

Status
Not open for further replies.
Sacaq

Sacaq

Mechanical
Joined
Nov 4, 2014
Messages
42
Location
TW
Hi~

I want to mesh a pie-shape surface like this:
File:MG_initial_final.png


Is it possible to mesh a surface in DesignModeler like we do in Gambit?
For example, first distribute some points on each edge and then mesh the surface by using the points.
Thank you!
 
Status
Not open for further replies.

Similar threads

A
generating mesh
Replies
2
Views
7K
Ahmad_f88
A
andradesilva
  • Locked
  • Question Question
modal analysis in ANSYS Mechanical APDL 2020 R2: How to see graphical results without mesh/elements
Replies
1
Views
952
NRP99
NRP99
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
841
Rabea-19
R

Part and Inventory Search

Sponsor

Back
Top