How to model this type of nozzle in PVELITE

[SmallInfo]

Hi experts,
I am modelling a vessel which has a nozzle as shown in image, need guidance on how to model this type of nozzle shown at the bottom?
Thanks

 

[CuMo]

Design the forged stub/hub for reinforcement and then use the Attached piping function to design the elbow and the pipe + flange sections of the nozzle.

See attached example.

 

[SmallInfo]

Thank you so much CuMO

 

[CuMo]

You're welcome.

 

[SmallInfo]

Hi CuMo, I am struggling in making davit arm in PV ELITE, can you please help again?
Thanks

 

[r6155]

Please, do not duplicate post.

Regards

 

[r6155]

PIP Standard drawing VEFV1119 Vessel Column Davit may be used, and no calculation is required.
I don´t know dimensions of your example.

Regards

 

[jtseng123]

This special davit may need hand calculations for the arm and support clips. See Dennis Moss design manual for guidelines. Also check weld strength and local stress on shell.