Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to plot stress for a given time?

Status
Not open for further replies.
Andengel

Andengel

Mechanical
Joined
Nov 19, 2012
Messages
2
Location
NO
Hi,

I have made a transient analysis of an offshore windmill, and traced the top node during an interval of 100 seconds with the NSOL-command. This gave me a maximum deflection occurring at 20 seconds.

How do i plot the Von Mises-stress for this time?
 
Sort by date Sort by votes
Go to /post1 and click on "read results" in the left hand menu. Scroll down until you reach the 0.2s time set of results and click read. Then issue plns,s,eqv in the command menu bar.


------------
See faq569-1083 for details on how to make best use of Eng-Tips.com
 
Upvote 0 Downvote
That did the trick. Thank you!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sparky4598
  • Locked
  • Question Question
Static structural structural error plot
Replies
0
Views
2K
Sparky4598
Sparky4598
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
809
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
LS_SMS
  • Locked
  • Question Question
Zero Through-Thickness Bending Stress
Replies
9
Views
1K
TGS4
TGS4

Part and Inventory Search

Sponsor

Back
Top