How wheel load is distributed on a slab under soil?

[precast123]

Hi

How wheel load is distributed on a slab buried 1m deep in soil? Is attached analysis is correct?

 

[TehMightyEngineer]

Based on AASHTO's load distribution through soil cover I calculate a distribution width of 1.37 m by 1.37 m which results in a distributed load of 53 kN/m[sup]2[/sup].

Professional Engineer (ME, NH, MA) Structural Engineer (IL)
American Concrete Industries

http://www.americanconcrete.com

 

[JStructsteel]

Are you using LFD or LRFD? Also what is your tire width? I believe those factor into the distribution.

 

[TehMightyEngineer]

Yeah, I assumed a 10 inch by 10 inch tire contact area.

Professional Engineer (ME, NH, MA) Structural Engineer (IL)
American Concrete Industries

http://www.americanconcrete.com

 

[precast123]

Will this apply here? Please see attachment.

 

[BAretired]

Big difference between the Boussinesq and Westergaard solutions in Example 6.2 (11.43 vs 7.25 psf).

BA

 

[JStructsteel]

Per AASHTO, Its the tire contact area increased by 1.15 times the depth of fill. If you have overlapping wheels, it would increase. Im getting around 70Kn/m