HP Printer Setup

[rossly]

We have a HP LaserJet 4000 with only a 8.5x11 tray. I have seen at previous jobs where I can plot from drafting and the print will be scaled to fit the paper. I don't know what the plotter switch is. I checked the doc's and couldn't find it. Any suggestions?


Ross Parpart
Product Design Engineer

http://www.decoma.com

 

[Xwheelguy]

Ross,

Hopefully you're on NX2, as we still are here. Here is our 8.5x11 plot queue:

Despooler Name = UGIIPS
Plotter Vendor = POSTSCRIPT
Plotter Type = Pen
Number Of Pens = 15
Controller ID =
Plotter Model = HP
Plotter Switches = /AS/AR/SP=MW
Media Control = Continuous Form
Distance Between Plots = 0
Output Mode = Queue
Plotter Com Line =
System Queue Name = \\PPE12\PPELASER
Directory Pathname =
Tape Density = 1600
Message Interval =
Message Com Line =
Horizontal Maximum = 0
Vertical Maximum = 0
Steps Per Inch = 1440
Optimization Level = None

Hope this helps.

Tim Flater
Senior Designer
Enkei America, Inc.

http://www.enkei.com

 

[rossly]

Thanks Tim, worked great.