HR Steel Thickness Tolerance for .250 Thick

[vendo]

I can not find the thickness tolerance to apply to HR Steel at .250

 

[Bribyk]

Try here:

http://www.russelmetals.com/pdf/english/service/pdf_catalogue/Sec_04_Steel_Plates.pdf

 

[ajh1]

ASTM practice for plates (material 0.235" and thicker) is -0.01" / + 0.03" to 0.04" depending on width of plate.
ASTM A6 Table 1.

 

[JayCarp]

I might add that for pressure vessel use the thickness MAY go .010 undersize with no penalties -