Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HVAC and air distribution system dead load calculations

Status
Not open for further replies.
tcurtis

tcurtis

Civil/Environmental
May 28, 2003
1
Where do I find information (table values) regarding the calculation of the uniform dead load contribution of an HVAC system for a multi-family, single story, residential dwelling with overhead duct?
 
Status
Not open for further replies.

Similar threads

FrancoisY
  • Question
rated standard for HVAC relating leak test?
Replies
0
Views
1K
FrancoisY
FrancoisY
A
  • Locked
  • Question
Methods for Air Filtration and Humidity Reduction in a Glass Box
Replies
6
Views
3K
akithajkr
A
Poveydesign
  • Locked
  • Question
Wedge Calculations
Replies
7
Views
481
3DDave
3DDave
D
  • Question
RPM range for air duster/blower
Replies
10
Views
3K
dgeesaman
dgeesaman
Kash2013
  • Locked
  • Question
TEWAC (Totally Enclosed Water Air Cooler) Generator and potential leak of water to air
Replies
4
Views
362
Kash2013
Kash2013

Part and Inventory Search

Sponsor

Back
Top Bottom