I design overhead sprinkler systems and use hydracad 2008 and i am having problems with the autoline/autopipe command. The arrow that helps you pick a line/pipe to break is too small and to change the direction of the line is very touchy you have to be very exact. It used to be much easier the arrow was bigger and it was easier to change direction. i've tried every option and osnap setting it seems with no luck. any help would be much appreciated. thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
hydacad/ autoline problems
- Thread starter twd22285
- Start date