Hydraulic Fitting Models

[looslib]

We are looking for Pro/E parametric models of hydraulic fittings. We need T-adapters, straight adapters, 90-degree and 45-degree in ORS, JIC, NPTF and combinations.

Is there a site that has them?
Are they in the Pro/Piping library? If so, can they be modified for our corporate part numbering standards?

We can import STEP models, but I would really like to make 'family' templates that can be used to make variations on the fitting type.



"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[hasanpasha]

I think this will help you.

http://www.traceparts.com

they have a demo cd for a month...you can download or order it. but as you mentioned, although they are not in STEP models, but PRO-E parts, there is no model tree and no modification is available. at least for the mechanical components (like washers and gears) it was so. but hopefully, they have a tremendous archive.

 

[hasanpasha]

http://www.festo.com/INetDomino/coorp_sites/en/c4685b7b78c074c7c1256b87005726fa.htm

I don't have time now for detailed search, but have a look at here. festo is related with hydroulic-pnomatic automation, but maybe you can find something.

 

[RocketRonnie]

I've not tried any oif these myself, but there looks to be lots of standard parts here:

http://www.ptc.com/community/proe_catalogs.htm

 

[BRIANGAMER]

You can also go to the Parker website.

http://www.parker.com/ead/cm2.asp?cmid=815&