Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I have a drawing with OD thread ann

Status
Not open for further replies.

vayager4

Mechanical
Jul 16, 2010
2
I have a drawing with OD thread annotation M114 X 8TPI . We need to find out the pitch diameter. Looks like customized very long ago.
Could any one can help me to find the pitch diameter?
James
 
Replies continue below

Recommended for you

Not going to be easy with identifying what the thread form is supposed to be. What does the mating part call for?
 
Mating part is hose tail nut, but we do not have one.
 
That is ridiculously close to the o.d. and tpi of an American 4"-8 NPSC (National Pipe Straight Coupling) pipe thread (4" pipe has a nominal o.d. of 4.5 inches, or roughly 114-115 mm). Suggest you get a copy of Machinery's Handbook and look at the various straight pipe threads (NPSM, NPSF and NPSI are other variations of straight (non tapered) pipe threads. For NPSC the pitch diameter range for 4"-8 is 4.3754 to 4.3988 inches.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor