I have a question about the installation of the beam detector.

[Mike Hou]

Is it correct to install a beam detector on this site? Is there a NFPA regulation on this?

 

[cdafd]

As long as installed per manufacture instructions,,,, I see no problem

Normally I see them lower on the wall

 

[cdafd]

Why the question

 

[Mike Hou]

As long as installed per manufacture instructions,,,, I see no problem

Normally I see them lower on the wall

thanks

 

[Mike Hou]

Why the question

because about Factory inspection team request we install location likt picture, but The instruction manual requires that the beam detector should be 1 meter above, below, left, and right side without any obstructions............

 

[cdafd]

I would call manufacture tech support

Ask them if it is ok.

 

[ProSafPlant1]

NFPA 72 Fire Alarm Code - see attached excerpt, assuming this is a beam type smoke detector.