Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need some tree help.

Status
Not open for further replies.

datamanager101

Automotive
Aug 2, 2004
5
US
I am working with a Catia Part File of a Die assembly from a customer and can see that each part of the assembly is located in the tree.
I can hide/unhide each part and switch between visable parts, but do not know how to have all parts visable at the same time. Can anyone please help me with this?
 
Replies continue below

Recommended for you

Have you tried using the "Search" command?

forfun
 
Hi,

Select from top level assembly. use selection mode / select all. then turn in show / no show.

You might need to do it twice in order to bring all PARTS in show.

I said PARTS, if Bodies are in noshow, you need to make your selection deeper (not only at product level).

But working at Product level the select all is good.

Eric N.
indocti discant et ament meminisse periti
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top