Mar 6, 2007 #1 Muninn Mechanical Mar 5, 2007 8 is there any way to work with static analisis without it?
Mar 6, 2007 1 #2 solid7 Mechanical Jun 7, 2005 1,403 Umm, yes... You just ignore the message, and proceed as normal. Most people who run a static case don't have the Intel Math Kernel. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
Umm, yes... You just ignore the message, and proceed as normal. Most people who run a static case don't have the Intel Math Kernel. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Mar 6, 2007 Thread starter #3 Muninn Mechanical Mar 5, 2007 8 the thing was that i tried but gave me a error, runtime exception then just click ok and the program closes Upvote 0 Downvote
the thing was that i tried but gave me a error, runtime exception then just click ok and the program closes
Mar 6, 2007 #4 solid7 Mechanical Jun 7, 2005 1,403 It's not being caused by not running the math kernel. What release and service pack are you using? ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
It's not being caused by not running the math kernel. What release and service pack are you using? ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Mar 6, 2007 Thread starter #5 Muninn Mechanical Mar 5, 2007 8 v5r16 not sure about the service pack tho :/ Upvote 0 Downvote
Mar 6, 2007 #6 solid7 Mechanical Jun 7, 2005 1,403 I would try to search out a PMR. I remember seeing this issue come up before. Can't remember who or where, but know that it's been discussed. Anyway, the point I'm trying to make is that even with MKL installed, you will still have that message, because it's not related to it... Hope that helps. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
I would try to search out a PMR. I remember seeing this issue come up before. Can't remember who or where, but know that it's been discussed. Anyway, the point I'm trying to make is that even with MKL installed, you will still have that message, because it's not related to it... Hope that helps. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Mar 6, 2007 Thread starter #7 Muninn Mechanical Mar 5, 2007 8 yeah it does thx ill look into that problem Upvote 0 Downvote
Mar 6, 2007 #8 solid7 Mechanical Jun 7, 2005 1,403 which workbench are you running? Is it GPS or GAS? ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
which workbench are you running? Is it GPS or GAS? ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Mar 6, 2007 Thread starter #9 Muninn Mechanical Mar 5, 2007 8 i normaly use the assembly one, but i think i have used the other one too Upvote 0 Downvote
Mar 7, 2007 #10 PeterGuy Automotive Jan 15, 2003 249 is hardware your hardware certified? I have seen runtime exceptions at the same point on AMD MP processors, which are not certified. Upvote 0 Downvote
is hardware your hardware certified? I have seen runtime exceptions at the same point on AMD MP processors, which are not certified.
Mar 7, 2007 Thread starter #11 Muninn Mechanical Mar 5, 2007 8 yeah is a amd processor the computer im testing on, probably that is the problem :/ Upvote 0 Downvote
