Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Identify six-lead delta induction motor 1

Status
Not open for further replies.

doc70

Electrical
Joined
Mar 24, 2013
Messages
2
Location
CA
I have a three phase, 150HP - 600V, 1750RPM, delta, single speed, induction motor.
All six leads have lost their indentification.
I am looking for advice how to identify the start and end leads for T1-T6, T2-T4, T3-T5 with an ohmmeter.
I have forgotten the technique, my twelve year-old school books are 3000km away and I don't want to (possibly) mess up.
 
cheers for the link, should work for me.
 
Isn't it T1-T4, T2-T5, T3-T6 ?
Anyway the battery method is okay. I've used it myself to identify mis-identified 3-phase lead wires.


STF
 
Your numbers look like the NEMA numbering scheme, SparWeb.

Bill
--------------------
"Why not the best?"
Jimmy Carter
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top