Simba13
Structural
- May 19, 2020
- 105
Good Morning all,
We're working on a renovation of a historical building and I'm trying to identify the metal deck they used in the composite floor system. There was already a renovation done around the 1960's and we believe this floor was installed for infill around that time. The total slab on metal deck thickness is approx. 4.7" according to field measurements so in catalog terms that could either be 4.5" or 5". I've attached a picture of the other measurements taken
I can't seem to find any resources online to identify decking installed around the 60's.
I've submitted the question on SDI's website as well but while I was waiting I figured I would ask on here as well.
Any help would be greatly appreciated. Thanks!
We're working on a renovation of a historical building and I'm trying to identify the metal deck they used in the composite floor system. There was already a renovation done around the 1960's and we believe this floor was installed for infill around that time. The total slab on metal deck thickness is approx. 4.7" according to field measurements so in catalog terms that could either be 4.5" or 5". I've attached a picture of the other measurements taken
I can't seem to find any resources online to identify decking installed around the 60's.
I've submitted the question on SDI's website as well but while I was waiting I figured I would ask on here as well.
Any help would be greatly appreciated. Thanks!
