Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IH diesel 282 performance curve

Status
Not open for further replies.

mathjunkie

Civil/Environmental
Jan 26, 2005
2
I am looking for the performance curve and fuel consumption rate for an old international diesel engine (UD-282). The engine is the drive unit for a low lift Berkeley irrigation pump. I called Case IH for tech support, they directed me to local dealer who has no tech manual for an engine that old. None of the local mechanics have access to the curves. My next step is to look at the fuel injection pump and see if there are consumption rates for it. Any other ideas?
 
Replies continue below

Recommended for you

I don't think you are going to glean much by looking at the fuel pump. First off the amount of fuel delivered is also partially dependent on the injectors. Second, you are only going to inject enough fuel as is necessary to meet your power demand. I would think that if you can find consumption rates for other diesels at the same engine speed on this same water pump your IH will be in the same ballpark. The difference in parasitic losses and engine efficiencies will be small compared to the power demanded by the pump. (assuming both do or do not have a turbo)

ISZ
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor