Image file for Company logo 1

[steiner949]

How is it that I can turn the logo we use into an image file instead of just a sketch that was made? I am using NX 7.5.1 and am just trying to set up some drafting templates.
Thanks.

 

[JohnRBaker]

If you can display your logo as curves in NX, just created an image file, such as a PNG, JPEG or TIFF, by going to...

File -> Export -> PNG/JPEG/TIFF...

...and then place it on your drawing using...

Insert -> Image...

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[steiner949]

Alright, thanks John.

 

[steiner949]

Ok, so I have the logo saved as an image file. How do I go about inserting it into the table that I have set up as my title block?

 

[JohnRBaker]

You have to create some 'white space' in the table and insert it after the table has been added to the drawing sheet (it can't be included in the table itself).

I did something similar with drawing borders. I make my borders are custom symbols which can't include an image, so when I make by drawing template file, I add the custom symbol for the border and then add the image and save the Drawing template file, but I had to bring the border object and logo object together in the template file.

I've attached a example of one of my drawing template files so you can see how it was done.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[steiner949]

Alright, thanks again, John, you are a life saver.