Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

*IMPERFECTION by input file!

Status
Not open for further replies.
Scard

Scard

Structural
Joined
Nov 11, 2012
Messages
5
Location
AU
Dear All,
Regarding the option of incorporating geometric imperfections by using an external input file, what would be the template of that file? Namely, when you have several instances and thus, several nodes labelled as node 1, node 2....

Just to clarify, let me add that I am not adopting the buckling modes approach but instead defining directly the 3 components of each node offset.
/S

 
Status
Not open for further replies.

Similar threads

Adil Memet
  • Locked
  • Question Question
looking for input file
Replies
4
Views
2K
FEA way
FEA way
StanD_1
  • Locked
  • Question Question
*Include, Input error
Replies
1
Views
1K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Cohesive zone modelling experimental input for simulation compatibility
Replies
2
Views
720
abc123ali
abc123ali
abc123ali
  • Locked
  • Question Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top