Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Importing Iges beam model in Workbench?

Status
Not open for further replies.
JSV

JSV

Mechanical
Mar 14, 2005
7
Hi

Does anyone know how to import an IGES 3D beam model into Workbench. I know how to do it in Ansys Classic, but I can't do it in Workbench?

 
Replies continue below

Recommended for you

Sort by date Sort by votes
If you want to use beam elements I'd stick with classic ansys. Workbench is none to strong in the subject of line elements.
 
Upvote 0 Downvote
Hi Stringmaker
I know classic is better, but I would still wan't to know if it is possible and how to do it. I have seen it done.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
531
struclearner
struclearner
H
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
2K
karachun
karachun
IJR
  • Locked
  • Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
483
IJR
IJR
md_salem
  • Locked
  • Question
how to do share topology in the design modeler in Ansys Workbench
Replies
1
Views
196
Stick.
Stick.
IJR
  • Locked
  • Question
Workbench 19: Submodelling (?) error
Replies
0
Views
147
IJR
IJR

Part and Inventory Search

Sponsor

Back
Top Bottom