Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

In-line pressure balance expansion joint at Caesar II

Status
Not open for further replies.

Jacks123

Mechanical
Dec 10, 2013
2
0
0
ES
Hello !!!
New at this !!!... and needing some help to model a In-Line pressure balance expansion joint without any elbow at Caesar II. not convinced with results ... (dwg attached!!)
Thanks !!!!... :)
 
Replies continue below

Recommended for you

Status
Not open for further replies.
Back
Top