Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

In my latest version of NX it takes

Status
Not open for further replies.

siddharth_design

Mechanical
Feb 1, 2024
3
In my latest version of NX it takes unusual long time to save even simple part and assembly files. How to solve this issue? Any kind of help would be appreciated.
 
Replies continue below

Recommended for you

It will take a longer amount of time to save the first time the file is saved in the new version NX, but the save after that you should see an improvement.
Let us know if that is not the situation here.

Jerry J.
UGV5-NX1899
 
It takes same time to save everytime. Even if i don't do any modification to existing assembly file and tried to save file again it also takes long time. Previously I though that size of file might be big but it happens even in small size file too.
 
A couple questions:
What version of NX are you on?
Are you on Teamcenter?

Jerry J.
UGV5-NX1899
 
"In the latest version ..."

Does that mean a newly installed version?

Possibly part of that installation included a reference to a non-existent directory that Windows has decided is the most important directory in the world and will wait a long time until it finally times out.

Look at the Task Manager starting just before the slow save. If everything about NX drops to 0% CPU after some initial spike it's probably waiting for an event that will never happen.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor