Incorrect parts list quantity

[overkill4]

Hi All,

I have a castor assembly that is showing 2 for a part when there is only 1 in the assembly.

Any idea what could be causing this?

Cheers


60% of the time, it works every time.

 

[automationbabe]

BOM override within the model or the drawing's parts list?

There are a couple places a manual override can be done.

 

[overkill4]

Where can a BOM override be done in the model?

Thanks



60% of the time, it works every time.

 

[automationbabe]

In the Assembly Panel, there is a "Bill of Materials" feature that will pull up your BOM. In my view, a manually over-written BOM notes what's change in bold blue text.

I'm not sure how to reset this to pull the data from the model if it is over-written though.

 

[automationbabe]

I did find how to reset the value of whatever was changed. Just delete the entry and the BOM will pull the info from the model.

 

[overkill4]

Thanks for the help.

I'll check today to see if that fixes it.

Cheers


60% of the time, it works every time.

 

[imcjoek]

On a parts list at the .idw level you can also reset to the default BOM value by right clicking the bold blue text and checking "static value".