Industry Stadard cross referance table

[firstcount]

Does anyone know of a table that cross references industry standards for material call outs? (i.e.. SAE vs. ASTM vs. JIS vs. ISO vs. GW and so on...)
I understand between the different industry standards different test methods are used to quantify the specific properties but there should be some swag comparison table somewhere. Right?

Oh, I'm looking for a table that encompasses metals, & non-metals.

Thanks in advance for your assistance.

First Count

 

[EngJW]

"SAE AMS Index" (Aerospace Materials Specifications"

This may not have everything you want but it is an industry work-horse.

 

[firstcount]

Thanks JLwoodward.
I called the SAE customer help line prior to posting this message and they indicated SAE publishes no such table.
I will look SAE AM Index and see if there is anything there though.

Thanks.

First Count

 

[TVP]

firstcount,

No single table exists. There are however several excellent references for worldwide metal equivalents. Use the following link for more information:

thread330-93855

 

[firstcount]

TVP
thank you for your assistance. I will check outyour suggestion.

Thanks again!

First Count.

 

[swall]

The Encyclopedia of Spring Design from the Spring Manufacturers Institute (SMI) covers this for most of the spring wire grades.

 

[rorschach]

I've found that the UNS numbering system book is fairly comprehensive at least for the chemistry side of things. It does not however address heat treatment/cold work.