Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inexpensive gear head source?

Status
Not open for further replies.

Guanton75

Mechanical
Jan 7, 2003
18
Can anyone offer a good inexpensive source for gear heads for a NEMA 23 motor? I need a ratio of around 20:1 with e final output torque around 32 in-lb and 150 rpm. Back drivable is need too. Of course, a good cheap 75 watt 3-phase motor would be helpful too but the Pittman motors seem ok. :) Quantity is around 300/year.

Thanks,
Seth

 
Replies continue below

Recommended for you

Check the Grainger or Minarik catalogs for gearmotors large and small at the quantities you need. (About 70 of my designs are in both.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor