Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Information Window Suddenly NOT Opening Up! 4

Status
Not open for further replies.

tickk30

Automotive
Feb 7, 2005
6
Hello All,
My problem may be an obvious one, but still a headscratcher to me.
For some reason my information window is not working.
Does anyone know if I may have inadvertently turned it off?
Any help is appreciated.
 
Replies continue below

Recommended for you

I had a similar issue. It seemed that I dragged it over to the corner and only the very top edge was visable. Check to see if that is it. I may of had to turn off all my toolbars to get at it also. I forgot exactly what I had to do but that sounds about right.




Ross Parpart
Product Design Engineer
 
Thank You rossly,
That must have been part of it. I went to
Preferences-User Interface and hit the "reset window position" and it popped back in front of me.
Thanks for your help.
Tickk
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor