Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inland-Ryerson Metal Building

Status
Not open for further replies.

jayrod12

Structural
Mar 8, 2011
6,153
Hi All,

Maybe my google FU isn't what it used to be, but I can't seem to find any real information regarding an old PEMB I'm working on. This is a true PEMB off the shelf type item.

From what I can tell it's from Inland Ryerson Building Systems (potentially also called Inryco).

My frames are 46'-10 out to out of column with an eave height of 12'-6" and a peak height of 19'-8".

We have the original drawings, however they just indicate typical part numbers. I.E. the columns are called 2700-101 and the rafter is 2700-100. The purlins are all called off as part numbers as well with a general note about 9" C x 16 Ga unless noted otherwise.

If anyone happens to have some documentation from this company kicking around, I'd love to get my hands on it. I'm hoping to minimize the destructive investigation if possible.
 
Replies continue below

Recommended for you

Thanks, I meant to add I've sent them an email, haven't heard back.

Based on my googling, the original company went bankrupt in 1992. I believe that is a reincarnation. But I'm hoping they got something.
 
Turns out their emails are dead. Or at least they keep rejecting my inquiry email. And their embedded website contact us page is acting up.
 
I'll give it a shot. Thanks.

In the meantime, if anyone has anything, it'd be appreciated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor