Inox / Monel

[braham0793]

Dear ;

Good afternoon,

I will make a line of stainless / Monel 400 pipe, I wonder what suggestions may indicate me to bring good manufacturing process, welding and cleaning.

The line is 3 "and the seals are SW.

The manufacture is for a hydrogen plant.

Best regards.

 

[moltenmetal]

SW is strange at 3"- it usually stops at 2" NPS.

It would be especially strange to use SW in Monel at a large size.

 

[braham0793]

Sorry, the line is 2 ".