Inserting second and subequent parts into an assembly

[PrintScaffold]

Greetings all!

When I insert first part into an assembly, it is put into the zero of absolute coordinate system and grounded. When I insert second and subequent parts into the same assembly, they are asking for the alignment.

Is it possible to insert all parts into an assemby the same way as the first one - without aligning them manually, just into the the zero?

Industry creates wealth!

 

[mcgyvr]

Always a good idea to state which version of Inventor you are using but you can use ground and root..

http://help.autodesk.com/view/INVNTOR/2015/ENU/?guid=GUID-40AD02B0-91C7-48CF-BCC2-A7D902FF0713

 

[PrintScaffold]

Hi!

2013 for me currently.

Industry creates wealth!

 

[mcgyvr]

Not sure if that was added into 2013 but its been available for a long time now you just need to add it to Inventor.

http://knowledge.autodesk.com/suppo...rounding-component-to-origin-of-assembly.html

 

[PrintScaffold]

Thank you, I'll have a look!

Industry creates wealth!

 

[Montelav]

I believe that in 2013 you have the opportunity to 'on place item' right click and select grounded at origin.

 

[PrintScaffold]

Figured this out! Thanks all!

Industry creates wealth!