Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installed Cost of a Steam Plant

Status
Not open for further replies.

VML8263

Mechanical
Jun 2, 2015
1
I am looking for rules of thumb for the installation cost of a steam plant. Things like cost per MLB or BHP or BTU/HR input. The purpose is to use in rough estimates of installation cost when preparing projects. Can anyone help?
 
Replies continue below

Recommended for you

Without providing much more definitive information, you cannot expect any meaningful answer.

Valuable advice from a professor many years ago: First, design for graceful failure. Everything we build will eventually fail, so we must strive to avoid injuries or secondary damage when that failure occurs. Only then can practicality and economics be properly considered.
 
Use the Search feature to look for other threads in these forums on this topic; the same question using different wording has been asked here before.

CR

"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor