frantal
Computer
- Jun 5, 2011
- 6
I have built a project of a insulated Power Supply 230V AC followed by a Variac.
I would add a circuit to obtain DC output.
The voltmeter I bought has only 3 poles: one + = power supply, one = to test the voltage and common negative.
Could I connect all as I show in the schematic attached?
Many thank for the help and suggestions
I would add a circuit to obtain DC output.
The voltmeter I bought has only 3 poles: one + = power supply, one = to test the voltage and common negative.
Could I connect all as I show in the schematic attached?
Many thank for the help and suggestions