Insulating joint (cable lugs)

[ceasar20]

dear all,

in order to connect surge Surge Diverter , its possible to add and weld cable lugs on pipeline insulating joint (thickness 8.6 mm) ?

thanks in advance

 

[LittleInch]

Is it possible?

Yes, but only on the spool element and not on the section containing the insulation material

These are usually standard attachments.

You could also braze it on to reduce temperature issues.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[ceasar20]

thanks LittleInch

 

[SJones]

Has the full length of the item been internally coated?

Steve Jones
Corrosion Management Consultant

http://www.linkedin.com/pub/8/83b/b04

All answers are personal opinions only and are in no way connected with any employer.

 

[ceasar20]

Yes SJones ,full length internally coated

 

[SJones]

@dorri,

Thus, will there not be an impact on coating integrity from the welding activities?

Steve Jones
Corrosion Management Consultant

http://www.linkedin.com/pub/8/83b/b04

All answers are personal opinions only and are in no way connected with any employer.

 

[LittleInch]

Draw us a picture of the IJ and where you want to weld on your missing lugs.

why were these not included on the original data sheet / design? They are pretty standard items.

You can also weld them / CAD weld them on outside of the IJ and its spool piece.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[ceasar20]

already included in our data sheet
.

BR