International Conference of Building Officials (ICBO) Evaluation Report #4016

[sud1986]

thread507-28410
Hello everyone,
I am looking for the evaluation report referenced in the subject line. There was brief discussion about it in the above thread but the link for the report no longer works. I am hoping if someone have it saved and can please share it here, that would be great. I am looking for some additional information on HIT-C100 epoxy. Thank you!

 

[phamENG]

I don't have it, but isn't the ICBO the organization behind the UBC? Might be better to look for an ICC report. Unless this is for a historical application and you're evaluating an as built condition. Hilti doesn't offer a HIT-C100 anymore (though you can apparently find it on eBay).

 

[sud1986]

phamENG, thank you! I am looking for the information to evaluate an as-built condition and not looking for the product itself. I will look for the ICC report but I doubt this one is there in their archives.

 

[phamENG]

You may reach out to Hilti directly. They have field engineers who are usually more than happy to help. I haven't needed it from Hilti, but I had a Simpson Strong-Tie field engineer run down the data for a discontinued connector for me once. Anything they can do to make you like their brand and spec their products, they'll usually do it.

 

[sud1986]

We have tried reaching out to Hilti but they were not able to locate this evaluation report, therefore, I tried google and came across the previous thread.

 

[wannabeSE]

Try contacting ICC Evaluation Service. They have many old reports, but they may charge a fee. My other suggestion is wait a little while and try contacting Hilti again. Seems like some of there people have better luck than others at finding old information. Also, if you know the approximate date, it might help someone here find it. In years past, Hilti would pass out binders with all there anchor products along with the evaluation reports.