Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Intersection Design 2

Status
Not open for further replies.

viettho

Civil/Environmental
Feb 25, 2008
1
Hi everybody
I design an intersection but not much book about it especionly grade for it.
Help me with some pdf book!
Thanks
 
Replies continue below

Recommended for you

I am not sure whether you are working on a paved road or gravel. This link is for a gravel road design and maintenance manual sponsored by the USDOT.


Section one has the part you are looking for. I am not a highway engineer, so not sure if there would be any differences for other types of roads.

Hope this helps.
 
since most roads are owned and maintained by the government (town, city, county, state etc.) then they generally have established criteria for the design. You will have to use that criteria in your design. AASHTO is commonly referenced in US, however other countries have other codes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor