Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Intralink 3.2 build 2002270 versus 3.2 2001440

Status
Not open for further replies.

GunnarB

Mechanical
May 30, 2002
13
Have anyone installed Intralink 3.2 build 2002270?
Is there any major improvements from build 2001440?
Or maybe some bugs?

Regards GunnarB
 
Replies continue below

Recommended for you

Hi GunnarB, PTC seems to think there is improvement. I have been trying pick a build to go to. I am on 3.1 2001361. The only documented "bug" differences are ( from what I have read ) are TAN 117099 and TAN 116018. I do have a test environment set up with 2001440 and am curious if you have an installation of 2002270?

I guess my opinion would also be dependant on how extensively you are using Pro/I. Feel free to reply with any new info.

If this helps ya, gimme a star.
 
I am trying to refresh this thread, since the build 2002270 of Intralink has been available for a while, is there any advantages or disadvantages switching to 2002270?
 
Being a guy that trains, uses, installs and configures Intralink (but not a ptc guy) I can say thast the later release is better. For starters it solves a number of Locate issues, particularly if yo also install the additional service pack.

Adios
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor