Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Involute Form in Sketch
- Thread starter fred2002
- Start date
needahandle
Mechanical
The following link should take you to an explanation of how to do it in a different modeling product. You can probably just cruise by the step-by-step, but understand how they are using the math to build the profile, then translate to sketcher.
Terry
Terry
- Status
Similar threads
- Locked
- Question