Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPX 4 water proof rating

Status
Not open for further replies.

Axel F.

Mechanical
Aug 13, 2020
2
Hi all,
I want to cut some sheet metal and install a small 4 inch display. There are also some other electric devises inside the metal box so I need an IPX4 rating for around the display. What is the best and cheapest way to get the cut water proof?

Thank you!
 
Replies continue below

Recommended for you

What meanum best? Cheapest, no thought for maintenance/repair, added theft/tamper resistance, etc AND etc.

Is the display safe with splashing water from any direction?

If yes, Does the display manufacturer offer a gasket or something to seal the display to the panel?

How are you IP-ing the rest of the cabinet ?

There is always this - your results may vary.
 
Hi

thanks for your reply.

the whole box is made out of metal and has an IPX4 door for accessibility and maintenance.

the display itself is water resistant from the front but doesn't come with any support. it has a touch screen so having a cover box is not possible

I was looking for something like in the picture but with water resistant rating.

I already thought about some epdm structure or some gaskets but not sure if this is the best way and how strong this structure is. the box is standing outside and nobody should be able to steal the display by slightly hitting the surrounding

thanks guys
 
 https://files.engineering.com/getfile.aspx?folder=5e182544-17c6-4985-bfca-2cc7d347e2ee&file=IMG_20200813_093224.jpg
Axel F.,

Why not buy an off-the-shelf box that meets NEMA[ ]4 or IP66? All you have to do is seal the monitor.

--
JHG
 
Any interface that see repeated water collection from, say, dew or rain, needs to be heremetic, even if the rest of the seals are not. Diurnal cycles result in pressure cycles that can "pump" any standing water through a seal interface that is not impermeable to liquid water; I've seen such systems with inches of water collected inside after a few weeks of sitting outside with nightly dew condensing and dripping onto rubber seal interfaces.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor