Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Iron Sponge

Status
Not open for further replies.

maddocks

Petroleum
Aug 21, 2001
343
Does anyone have any sizing guidelines for an iron sponge tower? I know there are a lot of alternatives including aqueous iron processes, triazine, bio, etc. I've been asked to check on the required size of an iron sponge system. I need mass pickup of H2S in lb/lb and a space velocity criteria if possible.
 
Replies continue below

Recommended for you

A more popular non regenerable agent, which I have worked with for trace quantities of H2S in a natural gas stream, is the Girdler zinc oxide absorbent - also sold as Nissan Girdler in Asia under license. ICI Puraspec is similar. The gas stream has to be preheated though for this to work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor