Irritating Callouts 1

[SOLIDMODEL1]

Hi all,

In drawings, the pointer has a shadowed grey box next to it which shows the feature name, dimension name, sheet number, etc. depending on what's been clicked or what the pointer is hanging over. This appears to be slowing down the performance of the PC, beacuse it seems to be too busy showing this box, flickering away like a demented thing, than processing my next command. I've looked through help, but I can't see an obvious way to switch this off, if it can be at all. Can anyone help?

Conrad.

 

[SBaugh]

It can't be turned off to my knowledge... most likely the problem is in your hardware or VC/drivers... what are your Machine specs?

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[SOLIDMODEL1]

Cheers for the good news! ;-)

Machine is an hp xw8000 with dual Intel Xeon 3.06GHz CPU and 3GB of RAM. Video card is NVIDIA Quadro4 750 XGL.

Conrad.

 

[SBaugh]

What VC driver?

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[SOLIDMODEL1]

Driver provider is NVIDIA Version 5.2.1.6

Conrad.

 

[SBaugh]

Wrong driver - try SW certified Driver

Quadro4 980/900/750/700 6.14.10.9136

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[SOLIDMODEL1]

Finally able to install the new driver you suggested. All seems fine now.

Thank you very much

Conrad.