Is it possible to add text/annotation "below" a dimension line

[Dan2235]

In UG NX7.5 is it possible when adding dimensions to add text/annotaions "below" the actual dimension line & not just below the dimension value itself?? I'm new to UG NX after 15 years of using ProE.

 

[JohnRBaker]

You'll have to create the appended text as a separate note and position it where you would like it.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[CAD2015]

You can add simultaneously text by clicking on the Text icon while create dimensions (see the attached picture).

 

[CAD2015]

Sorry, I was wrong.
Ignore my answer and consider John Baker's.

 

[cowski]

To add to John's post, you can also use the origin tool (Edit -> Annotation -> Origin) to associate your new text note to the dimension. Then, if you move the dimension or view, the note will follow.

http://www.nxjournaling.com