Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there a "standard set" of CMM Attributes with a converted NX7 File?

Status
Not open for further replies.
MASawtell

MASawtell

Computer
Aug 31, 2010
334
In dealing with data that was recently converted from IDEAS to NX via the CMM tool - the NX part file exhibited a series of attributes like "UGII_DATA_MIG_ITEM_MIGRATE_DATE". Is there any Siemens documentation, or a website, which lists what attributes that created by CMM during a conversion?
 
Status
Not open for further replies.

Similar threads

NXsupport
  • Question
Is there a way to make extrude dialog remember the limits options set in the dialogbox
Replies
3
Views
2K
Ammaniya
A
NXsupport
  • Question
Is there a quick way to dynamically move a datum place across a body to measure minimum wall thickness
Replies
1
Views
1K
Toost
Toost
N
  • Question
Export attributes of items contained in a folder structure in Teamcenter
Replies
2
Views
3K
Rob_N
Rob_N
Anton Liubimov
  • Locked
  • Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
406
Anton Liubimov
Anton Liubimov
Asieros
  • Locked
  • Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
460
Asieros
Asieros

Part and Inventory Search

Sponsor

Back
Top Bottom