KirbyWan
Aerospace
- Apr 18, 2008
- 586
I'm designing a rivet set tool to drive MS20470A4 rivets to back up the machine head in an area with limited space. If I had more space I would purchase an SM201-4704 rivet set or similar, but instead I want to just machine a recess to fit the shape of the rivet in my tool. I have designed the recess based on the shape of the rivet head, but I was wondering if there is a standard with defined dimensions?
Thanks,
-Kirby
Kirby Wilkerson
Remember, first define the problem, then solve it.
Thanks,
-Kirby
Kirby Wilkerson
Remember, first define the problem, then solve it.