Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there anyone in this community t

Status
Not open for further replies.

DaveTroke

Aerospace
Oct 8, 2021
1
0
0
GB
Is there anyone in this community that knows how to fix a Series 2?

I had it for a long time and spent £1000 for it, however the suspension alignment was always a problem.

I'm curious as to how precise you need to be with the tweaks. The local garage stated that they have a height gauge that they would use in circumstances where the floor is not entirely level. I was simply curious about the size?

Thanks.
 
Replies continue below

Recommended for you

'Height' is not the issue as much as What the toe & camber changes are with ride height movements. This has to be done with fuel loaded and the driver in the seat. Lotii are notorious for having all 4 wheels follow a different path in life, including brand new ones. Net build carelessness.

Your garage ought to have an aligner that can measure & record all 4 wheel toe & camber changes when you pull own and push up the chassis. If they can't do that, find one that can.

"That's my opinion and I am unanimous with it" ...
 
Status
Not open for further replies.
Back
Top