Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO 14582 Help

Status
Not open for further replies.

DevinCharles

Automotive
Aug 28, 2012
2
Hello Everyone,

I just purchased ISO 14581 for hexalobular socket countersunk flat heads, but I've noticed that these are only rated to 08.8 quality class. I saw in the scope there is a high head version 14582 which can withstand full load in 10.9 class. I am unsure what "high head" refers to and I don't want to purchase another $70 spec to find that it is completely irrelavent to my application. Could someone help clear this up for me, are these a pan\button\oval head or are they just a slightly higher flat head? A picture of the fastener print would be idea, but a simple answer works too.

Thanks
Devin
 
Replies continue below

Recommended for you

I do not have 14582, but for sure this does not specify pan head, cheese head, or conventional socket head screws. These are covered in ISO 14583, 14580, and 14579 respectively. Without purchasing it for yourself, your best bet would be to contact a manufacturer of socket head fasteners, or a larger distributor of these products like Bossard, Würth, Fastenal, etc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor