ISO 2768 2

[FDEFILIPPI]

DOes anyone know if the USA has approved and adopted the ISO 2768 linear tolerances? IF so


Frank

 

[alexit]

We are a metric company in the US and use ISO 2768 as our drawing dimensioning standard. Which agency are you looking for approval from?

 

[ddkb]

1)is iso2768 the tolerance standard?( for the dimensions)
2)do you use any other standards in your drawings?
thanks,

ddkb

 

[alexit]

DDKB,
Our title block references ISO2768 and our component supplies are familiar with the tolerance standard.

Drawing format is to our corporate standard, according to DIN practices in all but one case (did't like the angle dimensions rotating text orientation, so all text is horizontal.)

 

[FDEFILIPPI]

Does anyone know if ANSI has approved ISO2768 linear tolances?

F

 

[kokelj]

where on the net can I find a standards for free

kokelj@gmail.com

 

[looslib]

No place that any has posted about. You have to buy them from the issueing organization or a distribution company like Global Documentation.

"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[mloew]

kokelj,

Please see the FAQ Where can I get ISO specifications from? (faq182-802). Also, see the post in Thread177-23759 by member TVP to understand why codes are not available for free.



Best regards,

Matthew Ian Loew


Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.